There are several heating types that are being used in the United States. The main ones are forced air and oil. When you are considering your own HVAC installation, there are several tools that you will need to make your project successful. These include a reciprocating saw, vents, duct tape, a hacksaw and tin snips, your new heating unit, and several different wrench sizes and screwdrivers. Learn more on Heating Murrieta.
How does your forced air system work? Your furnace burns fuel, which circulates heat through the system. Once the unit is heated, the fan blows the heated air through the system. It is also set up so that the cold air cannot be let into a room when the furnace is turned off. The size of your home will determine the size of HVAC unit you need to install.
Installing a new forced air and heating unit is one of the best investments you can make in your home, and if you are considering doing it yourself, it is definitely a job that will require a lot of your time. You can save a reasonable amount of money if you do it yourself as the average HVAC installation costs between $500 and $5,000, but you do need to un-install and re-install gas lines properly. If not, you could void the warranty on your system if you perform the installation yourself and opt not to go with a professional installer.
When you are performing your own HVAC installation, there are several steps that you need to take. The first one is that you need to install the unit according to the specifications by the manufacturer, making sure that it is vented properly and that it is in the proper location within your home.
After you have your new HVAC unit installed, you need to put in the ductwork. To do this, you need to make sure that you route the warm air from the unit to any rooms in your rooms that need to be heated. You will need to measure any duct routes that are coming straight from the furnace to the vent locations that separate into the rooms. Once you have cut the ductwork to the proper length you need to secure it together and wrap the joints. Now you can install the grills and thermostat, so that the furnace knows when to operate and the air can be distributed to all the rooms.
Because of the size of the project and the experience needed to make sure that the gas lines are put in properly, you may want to consider having your HVAC installation performed by a licensed professional so that you don’t take the chance of having a serious accident. You will also have your warranty if you need it.